Product maintenance and maintenance

 1. the equipment operator must be specially trained to understand its structure, performance and use, familiar with its operation and technical maintenance.
 2. not allowed to drink after the operation
 3. The operator shall not leave the post without permission and shall not hand over the machinery to the non-designated personnel.
 Fourth, the mechanical equipment should be used and managed by the crew or special personnel, clear responsibility system, to protect the machinery and equipment, rational use, correct operation, and keep it in good condition.
 5. When the machine is working, it is forbidden to repair, maintain, lubricate, and tighten. If it is found to be abnormal during work, it should be checked after parking.
 Sixth, mechanical equipment must not be sick or overloaded, if it is found to be abnormal, it should be stopped in time to check.
 7. Mechanical operators and coordinators must use labor protection equipment and supplies that meet the requirements.
 8. When working at night, there should be sufficient lighting facilities in the work area, and the lamps should be safe and easy to use.

-------------------------------------------------- -------------------------------------------------- -------------------------------------------------- -----------------

In order to extend the service life of each product, it is necessary to carry out certain maintenance and maintenance. Plastic machinery and equipment should also pay attention to maintenance and maintenance. Qingdao Zhenxiong Machinery Equipment Co., Ltd. provides you with the following points:

1. Regularly check whether the oil quantity of the lubrication pump tank and the base tank is sufficient. Check the reliability of the lubrication system and lubricate the moving parts as specified.

2. Regularly check the pipeline leakage and fastener fastening conditions.

3. Plastic machinery and equipment often check whether the safety device of the machine is normal and effective.

4. Regularly check the condition of the filter or packing, clean and replace it in time, and always pay attention to whether the oil quality is polluted and deteriorated. When the hydraulic oil turns into dark brown and emits odor, it is the performance of oxidative deterioration. The hydraulic oil should be updated as soon as possible. When there are small black spots or transparent bright spots in the hydraulic oil, it indicates that impurities or metal powder are mixed in. It should be filtered or oil changed. .

5. The cooler should be immersed and cleaned with carbon tetrachloride solution every 5 to 10 months of operation.

6. Maintenance of important parts such as screws and barrels shall be carried out in accordance with the instructions.